Door-Seals...5 to choose from.  Yes Five Seals...     

While indeed we have (5) Five different Seals PMA-FAA-Approved...Aero-PMA-Parts ONLY recommends the -01 & -02 for your aircraft entry doors. 

                                                            The -03 is for windows and -04 is for Baggage Doors.

The -02 works GREAT on all Doors, even baggage doors but your door may need more filler seal in the rear Top & Bottom...

.... In this case order the -01/-02 Air-Squeeze kit  Door-Seal Comparison     Click here Door-Seal Easy Page. 

The reason for (5) different seals is because door to door even the exact same model the door will fit differently. 

Any $15,000 car will have a better consistent fitting door than any $280,000 new aircraft.  Why? Weight & Balance.  G/a Doors must be light; therefore flimsy.

See aircraft door below to determine what correct seal to purchase:

Aircraft pictured below, could be Piper, Beech or any aircraft...it's the Door-Gap you should look at.  If the gap on your aircraft is 3/32" or SMALLER DO-NOT Purchase the "Squeeze-Out".  Instead purchase the "Air-Chamber" Seal.  You may then want to Purchase our Gap-Seal for only $129.95.  This gap-seal works together with our -02 "Air-Chamber" seal providing the same "Seal-Out" weather protection from Rain, dust and creepy crawling things.          

PLEASE NOTE: The Gap Clearance forward (near-hinges) will be paper-thin on all aircraft. The "Squeeze-Out" Seal is trimmed to fit.  Better still, order the "Air-Squeeze" Kit which includes both the -01 "Squeeze-Out" that fills the Gaps at the rear top and bottom of all doors, while the -02 Air-Chamber seal is install Fwd on your door near the hinges...NO Trimming required.

   See the gap...it's paper thin.  Most Pipers and some Cessna' s have very large Gaps in the rear, this aircraft does not.

If your gaps are very thin near the hinges Order the "Air-Chamber" -02

While no two doors are alike, therefore difficult for us to know from Seattle what seal is best for you.  Do the following and you will be able to determine which seal is BEST for you:

1) Remove the door and remove all seal the old Door-Seal Material.  With the Door Channel clean, re-install the Door and from inside close and Latch the door.
2) Look slowly for Gap's  from the inside and mark them with tape. 
3) you should see gaps at the rear top and bottom of the door, while tight fitting near the hinges

If you see Large Gaps then the "Air-Squeeze" Kit is the one to order...If you do not see any gaps at all or small gaps then get the -02

 Video> Click here to view Movie   video will show you how the seal works inside and outside.

Click Squeeze-Out        Click Air-Chamber Brown-Seal        Click Gap-Seal        Click Window & VERY tight  Doors 

                                                                                    Click when all the above fails.

                                                        You want fast answers      Click >>Matrix Chart of all Door-Seals

order page. Watch A/p install seal Jonathans Door-Seal $129.95 you too
Door-Seal Start here Video Movie-Door-Seal All Choices
Door-Seal Info -02 Squeeze-Out -01 Home Page Contact us Page

     

 

Hit Counter